Siewert L., Gericke K.
Navigating the Hybrid Landscape: A Literature Study on Hybrid Development Approaches for Physical Products
Proceedings from NordDesign 2024, doi.org/10.35199/NORDDESIGN2024.95

Zorn S.; Glaser T., Gericke K.
Criticality based planning of prototype sequences
Proceedings of the Design Society, Volume 4: DESIGN2024, Cavtat Croatia, doi.org/10.1017/pds.2024.89

Rode J., Jonuschies I., Matthiesen S., Gericke K.
Replication studies in engineering design – a feasibility study
Proceedings of the Design Society, Volume 4, pp. 115-124. Cambridge University Press, doi.org/10.1017/pds.2024.14

Krüger M., Gericke K., Zorn S.
Enhancing the IFM framework based on a meta-analysis of other design methods.
Proceedings of the Design Society, Volume 4, pp. 623-632.Cambridge University Press doi.org/10.1017/pds.2024.65

Schmitt P., Siewert L. and Gericke K.
A proposal for guiding the selection of suitable DfAM support based on experiential knowledge
Proceedings of the Design Society, 4, pp. 1829–1838. doi.org/10.1017/pds.2024.185

Martinec T., Valjak F., Horvat N., Goudswaard M., Nygard Ege D., Ballantyne R., Berg M. F., Glaser T., Grosse C., Lipsinic Z., Lukacevic F., Lukasiewicz M. S., Masovic R., McClenaghan A., Monti T., Ovrebo H.H., Schmitt P., Stubberud V., Taiwo E. T. J., Lisac A.
Virtual design hackathons: a data collection framework
Proceedings of the Design Society, 4, pp. 45–54. doi.org/10.1017/pds.2024.7

Gericke K., Eisenbart B.
Funktionalität
Produkte entwickeln mit IDE (2. Auflage), Vajna S., Rothkötter S. (Hrsg.), Springer. doi.org/10.1007/978-3-658-43785-5

Wichmann R., Eisenbart B., Kuys B., Gericke K.
Concept assessment and comparison of multifaceted engineering systems: an investigation of the function integrity indicator
Journal of Design Research, doi: 10.1504/JDR.2023.10058267

Krüger M. F., Zorn S., Gericke K.
Combining function modelling and requirements modelling with the IFM framework
Proceedings of the Design Society, Volume 3, pp. 987-996, Cambridge University Press, doi:10.1017/pds.2023.99

Zorn S., Hemmer M., Gericke K.
In search for shared characteristics of physical and virtual prototypes
Proceedings of the Design Society, Volume 3, pp. 2265-2274, Cambridge University Press, doi:10.1017/pds.2023.227

Rößler, L., & Gericke, K.
Usage and acceptance of management tool in project-based learning environments
Proceedings of the Design Society, Volume 3, pp. 3929-3938. Cambridge University Press, doi:10.1017/pds.2023.396

Murphy A. R., Patel A. R., Zorn S., Gericke K., Summers J. D.
The influence of representation on system interpretation: A search for most common set partitions
Proceedings of the Design Society, Volume 3, pp. 3423-3432, Cambridge University Press, doi:10.1017/pds.2023.343

Zorn S., Malz S.
Assessing competencies for sustainability in engineering educatuion - a case study
Proceedings of the International Conference on Engineering and Product Design Education, doi:10.35199/EPDE.2023.73

Gericke K., Eckert C., Stacey M.
Elements of a design method – a basis for describing and evaluating design methods
Design Science (8), Cambridge University Press, doi: 10.1017/dsj.2022.23

Gericke K., Eisenbart B.
Funktionalität
Integrated Design Engineering, 2. Auflage deutsch, Vajna S. (Hrsg.), Springer. doi: 10.1007/978-3-662-60439-7

Krüger M. F., Gericke K.
Adaptation of the Integrated Function Modelling Framework
Proceedings of the 24th International DSM Conference (DSM 2022), Eindhoven, doi.org/10.35199/dsm2022.04

Malz S., Zorn S., Kessler O., Gericke K.
How to enable engineering students to apply sustainable solutions in the product development process
Proceedings of the 24th International Conference on Engineering and Product Design Education (E&PDE 2022), doi.org/10.35199/EPDE.2022.51

Rößler L., Gericke K.
Analysing Paradigms for Managing Product Development: Conventional, Agile and Hybrid Approaches
Proceedings of the International Design conference DESIGN'22, Cavtat Croatia, doi.org/10.1017/pds.2022.28.

Schmitt P., Schnödewind L., Gericke K.
Rethinking System Boundaries for Better Utilisation of Additive Manufacturing Potentials – A Case Study
Proceedings of the International Design conference DESIGN'22, Cavtat Croatia, doi.org/10.1017/pds.2022.146.

Maheshwary K., Eisenbart B., Zorn S., Nelius T., Gericke K., Matthiesen S., Blessing L.
Assessing Rigid and Non-Rigid Spatial Thinking
Proceedings of the International Design conference DESIGN'22, Cavtat Croatia, doi.org/10.1017/pds.2022.236.

Zorn S., Jonuschies J., Gericke K.
Adapting course design to foster the development of spatial abilities in engineering education - a case study
Proceedings of the 23rd International Conference on Engineering and Product Design Education (E&PDE 2021), doi.org/10.35199/EPDE.2021.57

Wichmann R., Gericke K. & Eisenbart B.
Analysing risk to function fulfilment: applying the function integrity diagnosis and documentation method
Journal of Engineering Design, doi: 10.1080/09544828.2021.1913485

Blessing L., AJ Qureshi, Gericke K. (eds.)
The Future of Trans-Disciplinary Design
Springer London. doi: 10.1007/978-3-319-06382-9

• Gericke K., Adolphy S., Qureshi A.J., Blessing L., Stark R.
  Opening Up Design Methodology
  The Future of Trans-Disciplinary Design, L Blessing, AJ Qureshi, K Gericke (eds.), Springer London, doi: 10.1007/978-3-319-06382-9_1

Albers A., Wilmsen M., Gericke K.
Approach for the development and application of target process module sets
Proceedings of the Design Society: International Conference on Engineering Design, 1(2), pp. 531 – 540, http://dx.doi.org/10.1017/pds.2021.53

Helten K., Eckert C. M., Gericke K., Vermaas P.
Concept for a persona driven recommendation tool for process modelling approaches
Proceedings of the Design Society: International Conference on Engineering Design, 1(2), pp. 711-720, http://dx.doi.org/10.1017/pds.2021.71

Göhlich D., Bender B., Fay T., Gericke K.
Product requirements specification process in product development
International Conference on Engineering Design, 1(2), pp. 2459-2470, https://doi.org/10.1017/pds.2021.507

Schmitt P., Zorn S., Gericke K.
Additive manufacturing research landscape: A literature review
Proceedings of the Design Society: International Conference on Engineering Design, 1(2), pp. 333-344, https://doi.org/10.1017/pds.2021.34

Bender, B. and Gericke, K. (eds)
Pahl/Beitz Konstruktionslehre. 9. Auflage
Berlin: Springer Vieweg. doi: 10.1007/978-3-662-57303-7.

• Bender, B. and Gericke, K.
  Einleitung
  in Bender, B. and Gericke, K. (eds) Pahl/Beitz Konstruktionslehre. Berlin, Heidelberg: Springer Berlin Heidelberg, pp. 1–6. doi: 10.1007/978-3-662-57303-7_1.
• Pahl, G., Beitz, W., Gericke, K., Bender, B., Feldhusen, J. and Grote, K.-H.
  Grundlagen technischer Systeme
  in Bender, B. and Gericke, K. (eds) Pahl/Beitz Konstruktionslehre. Berlin, Heidelberg: Springer Berlin Heidelberg, pp. 9–25. doi: 10.1007/978-3-662-57303-7_2.
• Gericke, K., Bender, B., Pahl, G., Beitz, W., Feldhusen, J. and Grote, K.-H.
  Grundlagen methodischen Vorgehens in der Produktentwicklung
  in Bender, B. and Gericke, K. (eds) Pahl/Beitz Konstruktionslehre. Berlin, Heidelberg: Springer Berlin Heidelberg, pp. 27–55. doi: 10.1007/978-3-662-57303-7_3.
• Gericke, K., Bender, Beate, Pahl, G., Beitz, W., Feldhusen, J. and Grote, K.-H.
  Der Produktentwicklungsprozess
  in Bender, B. and Gericke, K. (eds) Pahl/Beitz Konstruktionslehre. Berlin, Heidelberg: Springer Berlin Heidelberg, pp. 57–93. doi: 10.1007/978-3-662-57303-7_4.
• Bender, B. and Gericke, K.
  Entwickeln der Anforderungsbasis: Requirements Engineering
  in Bender, B. and Gericke, K. (eds) Pahl/Beitz Konstruktionslehre. Berlin, Heidelberg: Springer Berlin Heidelberg, pp. 169–209. doi: 10.1007/978-3-662-57303-7_7.
• Gericke, K., Bender, B., Pahl, G., Beitz, W., Feldhusen, J. and Grote, K.-H.
  Funktionen und deren Strukturen
  in Bender, B. and Gericke, K. (eds) Pahl/Beitz Konstruktionslehre. Berlin, Heidelberg: Springer Berlin Heidelberg, pp. 233–254. doi: 10.1007/978-3-662-57303-7_9.
• Gericke, K., Bender, B., Feldhusen, J. and Grote, K.
  Entwickeln von Wirkstrukturen
  in Bender, B. and Gericke, K. (eds) Pahl/Beitz Konstruktionslehre. Berlin, Heidelberg: Springer Berlin Heidelberg, pp. 255–306. doi: 10.1007/978-3-662-57303-7_10.
• Bender, B., Gericke, K., Heusel, J., Bronnhuber, T., Helms, O., Krzywinski, J., Klocke, F., Dilger, K., Müller, R., Ehlers, T. and Lachmayer, R.
  Gestaltungsrichtlinien
  in Bender, B. and Gericke, K. (eds) Pahl/Beitz Konstruktionslehre. Berlin, Heidelberg: Springer Berlin Heidelberg, pp. 567–828. doi: 10.1007/978-3-662-57303-7_16.

Gericke K., Eckert C., Campean F., Clarkson P. J., Flening E., Isaksson O., Kipouros T., Kokkolaras M., Köhler C., Panarotto M., Wilmsen M.
Supporting Designers: moving from method menagerie to method ecosystems
Design Science (6), Cambridge University Press, https://doi.org/10.1017/dsj.2020.21

Gericke K., Eisenbart B.
Functionality
Integrated Design Engineering, 1. Auflage englisch, Vajna S. (Ed.), Springer, https://doi.org/10.1007/978-3-030-19357-7_7

Eisenbart B., Gericke K.
Function in engineering
Routledge handbook of philosophy of engineering, Michelfelder D. Doorn N. (eds.) Routledge, 2020, https://doi.org/10.4324/9781315276502-22

Gericke K., Eisenbart B.
Funktionalität
Produkte entwickeln mit IDE, Vajna S., Rothkötter S. (Hrsg.), Springer. doi: 10.1007/978-3-658-32033-1

Zorn S., Gericke K.
Development of spatial abilities in engineering education – An empirical study of the influence of visualisation media
Proceedings of the ASME 2020 International Design Engineering Technical Conferences & 32nd International Conference on Design Theory and Methodology IDETC/DTM2020; St. Louis; 2020 https://doi.org/10.1115/DETC2020-22428

Wichmann R., Eisenbart B., Gericke K, Lux. B.
Concept comparison: A function integrity indicator
Proceedings of the International Design conference DESIGN'20, Cavtat Croatia, http://dx.doi.org/10.1017/dsd.2020.70

Schmitt P., Gericke K.
Factors influencing the decision of conventional/hybrid lightweight design strategies and their effect on the design process
Proceedings of the International Design conference DESIGN'20, Cavtat Croatia, https://doi.org/10.1017/dsd.2020.181

Wilmsen M., Gericke, K., Jäckle M., Albers A.
Method for the identification of requirements for designing reference processes
Proceedings of the International Design conference DESIGN'20, Cavtat Croatia, https://doi.org/10.1017/dsd.2020.301

Krüger M., Zorn, S., Wichmann R., Gericke K.
The Application of the IFM Framework and FIDD Method on an Industrial Cigarette Filter Maker
Proceedings of the 22nd International DSM Conference (DSM 2020), MIT, Cambridge, https://doi.org/10.35199/dsm2020.19

Kayser N., Zorn S., Klein H., Gericke K.
Methodisches Vorgehen bei der Entwicklung eines Kernmaterialkonzeptes für Rotorblätter einer Großwindkraftanlage
Tagungsband 18. Kolloquium Konstruktionstechnik – Nachhaltige Produktentwicklung, Corves B., Gericke K., Grote K.-H., Lohrengel A., Löwer M., Nagarajah A., Rieg F., Scharr G., Stelzer R. (Hrsg.) Duisburg, doi: 10.17185/duepublico/73094

Corves B., Gericke K., Grote K.-H., Lohrengel A., Löwer M., Nagarajah A., Rieg F., Scharr G., Stelzer R. (Hrsg.)
Tagungsband 18. Kolloquium Konstruktionstechnik – Nachhaltige Produktentwicklung
Duisburg, doi: 10.17185/duepublico/73094

Koldrack N.
Produktentwicklung für den Einsatz von Rapid Manufacturing bei der Entwicklung von hydraulischen Spannbuchsen
Dissertation, Universität Rostock, 2020, https://doi.org/10.18453/rosdok_id00002726

Zorn,S.
Berücksichtigung statistischer Oberflächenkenngrößen bei der numerischen Simulation hydrodynamisch wirkender Radialgleitlager im Mischreibungsbereich
https://doi.org/10.18453/rosdok_id00002666, Dissertation, Universität Rostock, 2019

Corves B., Gericke K., Grote K.-H., Lohrengel A., Müller N., Nagarajah A., Rieg, F. Scharr G., Stelzer R. (eds.)
Agile Entwicklung physischer Produkte - Tagungsband 17. Kolloquium Konstruktionstechnik
RWTH Aachen, 2019, http://doi.org/10.18154/RWTH-2019-08298

Koldrack N., Brökel K.
Entwicklung einer hydraulischen Spannhülse für das Rapid Manufacturing
Agile Entwicklung physischer Produkte - Tagungsband 17. Kolloquium Konstruktionstechnik, Corves et al. (eds.), RWTH Aachen, 2019

Wichmann, R., Eisenbart, B., & Gericke, K.
The Direction of Industry: A Literature Review on Industry 4.0.
Proceedings of the Design Society: International Conference on Engineering Design, 1(1), 2129-2138. https://doi.org/10.1017/dsi.2019.219

Isaksson, O., Eckert, C., Borgue, O., Hallstedt, S., Hein, A., Gericke, K., Öhrwall Rönnbäck, A.
Perspectives on Innovation: The Role of Engineering Design
Proceedings of the Design Society: International Conference on Engineering Design, 1(1), 1235-1244. https://doi.org/10.1017/dsi.2019.129

Benetto E., Gericke K., Guiton M. (eds.)
Designing Sustainable Technologies, Products and Policies – From Science to Innovation
Springer, 2018

Gericke K., Eisenbart B., Waltersdorfer G.
Staging design thinking for sustainability in practice – guidance and watch-outs
Sustainability Science, König A. (Ed.), New York, Routledge

Wichmann R., Gericke K., Eisenbart B. Moser H.
A method for function integrity diagnosis and documentation: FIDD
Proceedings of the International Design Conference - DESIGN 2018, Dubrovnik, 2018

Manrique S., Simons D., Eisenbart B., Gericke K.
Eight key strategies for successful stakeholder involvement in design
Proceedings of the International Design Conference - DESIGN 2018, Dubrovnik, 2018

Filippi A., Suarez Madrigal A., Eisenbart B., Gericke K.
An exploratory study on the use of new design methods in design consultancies
Proceedings of the International Design Conference - DESIGN 2018, Dubrovnik, 2018

Jones D., Eckert C., Gericke K.
Margins leading to over-capacity
Proceedings of the International Design Conference - DESIGN 2018, Dubrovnik, 2018

Gericke K., Eisenbart B.
The Integrated Function Modelling framework and its Relation to Function Structures
AIEDAM - Artificial Intelligence for Engineering Design, Analysis and Manufacturing 31(4), Cambridge University Press, https://doi.org/10.1017/S089006041700049X

Gericke K., Eckert C., Stacey M.
What do we need to say about a design method?
Proceedings of 21st International Conference on Engineering Design, Vancouver, 2017

Eckert C., Wynn D., Maier J. F., Shapirow D., Chen H.X., Gericke K., Gladysz B., Clarkson P. J.
On the integration of product and process models in engineering design
Design Science, Cambridge University Press, https://doi.org/10.1017/dsj.2017.2

Eisenbart B., Gericke K., Blessing L., McAloone T.C.
A DSM-based Framework for Integrated Function Modeling: Concept, Application and Evaluation
Research in Engineering Design 28(1), Springer, https://doi.org/10.1007/s00163-016-0228-1

Waltersdorfer G., Gericke K., Desmet P., Blessing L.
An engineering approach to mapping meanings in products and services
Proceedings of 21st International Conference on Engineering Design, Vancouver

Gericke K., Kramer J., Roschuni C.
An exploratory study of the discovery and selection of design methods in practice
Journal of Mechanical Design, ASME, 2016. https://doi.org/10.1115/1.4034088

Eisenbart B., Gericke K., Blessing L.
Taking a Look at the Utilisation of Function Models in Interdisciplinary Design Practice
Research in Engineering Design, Springer, https://doi.org/10.1007/s00163-016-0242-3

Bender B., Gericke K.
Entwicklungsprozesse
Handbuch Produktentwickung, Lindemann U. (Ed.), Hanser Verlag, 2016, doi:10.3139/9783446445819.014

Gericke K., Eckert C., Wynn D.
Towards a framework of choices made during the life-cycle of process models
Proceedings of the International Design Conference - DESIGN 2016, Dubrovnik, 2016

Münzberg C., Gericke K., Oehmen J., Lindemann U.
An explorative interview study on crisis situations in engineering product development
Proceedings of the International Design Conference - DESIGN 2016, Dubrovnik, 2016

Gericke K., Roschuni C.
Discovery and Evaluation of Design Methods in Practice: An Empirical Study
Proceedings of the ASME 2015 International Design Engineering Technical Conferences & 27th International Conference on Design Theory and Methodology IDETC/DTM2015; Boston; 2015, https://doi.org/10.1115/DETC2015-47387

Eckert C., Albers A., Bursac N., Chen H.X., Clarkson P.J., Gericke K., Gladysz B., Maier J.F., Rachenkova G., Shapiro D., Wynn D.
Integrated Integrated product and process models: towards an integrated framework and review
Proceedings of 20th International Conference on Engineering Design, Milano, 2015

Gericke K., Eckert C.
The long road to improvement in modelling and managing engineering design processes
Proceedings of 20th International Conference on Engineering Design, Milano, 2015

Eisenbart B., Mandel C., Gericke K.
Integrated Function Modelling: Comparing the IFM Framework With SysML
Proceedings of 20th International Conference on Engineering Design, Milano, 2015

Eisenbart B., Gericke K., Blessing L.
DSM for Modeling and Analyzing Functionality: Views of Practitioners
Proceedings of 17^thInternational Dependency and Structure Modeling Conference, DSM 2015, Forth Worth, TX, USA, 2015

Waltersdorfer G., Gericke K., Blessing L.
Fostering sustainable user behaviour: Exploring meaning and its creation in products and services
Proceedings of the 11^thEuropean Academy of Design Conference – The value of design research, 2015

Waltersdorfer G., Gericke K., Blessing L.
Designing meaning to change consumer behaviour: an exploration
Proceedings of International Conference on Research into Design ICoRD’13; Springer, 2015, https://doi.org/10.1007/978-81-322-2232-3_30

Schabacker M., Gericke K., Szélig N., Vajna S. (eds.)
Proceedings of the 3^rdInternational Conference on Modelling and Management of Engineering Processes
Springer Berlin, 2014, https://doi.org/10.1007/978-3-662-44009-4

Gericke, Kilian; Moser, Hubert
Adapting a design approach: A case study in a small space company
Proceeding s of 2nd International Workshop on Modelling and Management of Engineering Processes (2012, November), Cambridge, UK; Heisig, P. and Clarkson, P.J. (Eds.), 2014

Siyam G., Gericke K., Wynn D.C., Clarkson P.J.
A model for value in Lean Product Development
Proceedings of the 3^rdInternational Conference on Modelling and Management of Engineering Processes, Vajna S., Gericke K., Schabacker M. (eds), Springer Berlin, 2014, https://doi.org/10.1007/978-3-662-44009-4_2

Qureshi AJ, Gericke K., Blessing L.
Stages in product lifecycle: Transdisciplinary design context
Procedia CIRP, Volume 21, Elsevier 2014, pp. 224-229, https://doi.org/10.1016/j.procir.2014.03.131

Eisenbart B., Gericke K., Blessing L.
Application of the IFM framework for modelling and analysing system functionality
Proceedings of the International Design Conference - DESIGN 2014, Dubrovnik

Eisenbart B., Gericke K., Blessing L.
An analysis of functional modelling approaches across disciplines
AIEDAM - Artificial Intelligence for Engineering Design, Analysis and Manufacturing, Cambridge University Press, special issue on Functional Descriptions in Engineering; vol. 27 no. 3, https://doi.org/10.1017/S0890060413000280

Gericke K., Qureshi A., Blessing L.
Analyzing transdisciplinary design processes in industry – an overview
Proceedings of the ASME 2013 International Design Engineering Technical Conferences & 25th International Conference on Design Theory and Methodology IDETC/DTM2013; Portland; 2013, https://doi.org/10.1115/DETC2013-12154

Gericke K., Meißner M., Paetzold K.
Understanding the Context of Product Development
Proceedings of 19th International Conference on Engineering Design, Seoul, 2013

Qureshi A.J., Gericke K., Blessing L. (editors)
Proceedings of the International Workshop on the Future of Trans-Disciplinary Design 2013
Luxembourg

Qureshi A.J., Gericke K., Blessing L.
Design process commonalities in trans-disciplinary design
Proceedings of 19th International Conference on Engineering Design, Seoul

Eisenbart B., Dohr F., Gericke K., Vielhaber M., Blessing L.
Potentials for Realising a Consistent Transition Between Functional Modelling with the IFM Framework and Early System Simulation
Proceedings of 19th International Conference on Engineering Design, Seoul

Eisenbart B., Gericke K., Blessing L.
Adapting the IFM Framework to Funtional Approaches Across Disciplines
Proceedings of 19th International Conference on Engineering Design, Seoul

Eisenbart B., Gericke K., Blessing L.
Integrating Different Functional Modeling Perspectives
Proceedings of International Conference on Research into Design ICoRD’13; Springer, 2013, https://doi.org/10.1007/978-81-322-1050-4_7

Gericke K., Blessing L.
An analysis of design process models across disciplines
Proceedings of the International Design Conference - DESIGN 2012, Dubrovnik, 2012

Eisenbart B., Gericke K., Blessing L.
A Shared Basis for Functional Modelling
Proceedings of NordDesign 2012, Aalborg, 2012

Eisenbart B., Gericke K., Blessing L.
Functional Perspectives Across Disciplines: A Literature Review
Proceedings of the International Design Conference - DESIGN 2012, Dubrovnik, 2012

Gericke, Kilian; Maier, Anja
Scenarios for coupling design thinking with systematic engineering design in NPD
Proceedings of the 1st Cambridge Academic Design Management Conference, University of Cambridge, 2011

Gericke, Kilian; Blessing, Luciënne
Comparisons of design methodologies and process models across disciplines: A literature review
Proceedings of 18th International Conference on Engineering Design, vol. 1, Design Society, Copenhagen, 2011

Gericke, Kilian
Enhancing Project Robustness: A Risk Management Perspective
Berlin, Germany, Gericke, Kilian, 2011 (doctoral thesis)

Eisenbart, Boris; Gericke, Kilian; Blessing, Luciënne
A Framework for Comparing Design Modelling Approaches Across Disciplines
Proceedings of 18th International Conference on Engineering Design, vol. 2, Copenhagen, 2011, pp. 344 - 355

Eisenbart, Boris; Gericke, Kilian; Blessing, Luciënne
Analysing Product Modelling Approaches Across Domains - Supporting Communication in Interdisciplinary Design Teams
Proceedings of 5th MODPROD workshop

Gericke, Kilian; Beinke, Christian; Gemmer, Pascal; Blessing, Luciënne
Entwicklungsmethodik nach Pahl und Beitz und Design thinking. Vergleich und Einordnung,
Design for X Beiträge zum 21. DfX-Symposium, 2010, pp. 117-130

Adolphy, Sebastian; Gericke, Kilian; Blessing, Luciënne
Cognitive estimation in the ideation phase of engineering design
Design Computing and Cognition '10, Stuttgart

Gericke, K.; Schmidt-Kretschmer, M.; Blessing, L.T.M.
The influence of the Design Task Description on the course and outcome of idea generation meetings
in McDonnel, J., Lloyd P. (ed.), About: Designing - Analysing Design Meetings; London (UK), CRC Press Taylor & Francis; 2009

Gericke K., Klimentew L., Blessing L.
Measure and Failure Cost Analysis: Selecting Risk Treatment Strategies
Proceedings of the International Conference on Engineering Design ICED09; Stanford

Gericke K., Kleinod B., Blessing L.
Analysis and Visualisation of Project Structure using Linkography: Focussing Project Risk Management
Proceedings of the ASME 2009 International Design Engineering Technical Conferences & 21st International Conference on Design Theory and Methodology IDETC/DTM2009; San Diego; 2009, https://doi.org/10.1115/DETC2009-86460

Gries B., Gericke K.
A Method for Identifying Improvement Potentials within Product Development Processes
Proceedings of the International Conference on Engineering Design ICED09; Stanford

Adolphy S., Gericke K., Blessing L.
Estimation and its Role in Engineering Design - An Introduction
Proceedings of the International Conference on Engineering Design ICED09; Stanford

Gericke K., Schmidt-Kretschmer M., Blessing L.
A framework to understand Project Robustness
Proceedings of the International Design Conference - DESIGN 2008; Dubrovnik

Gericke K., Blessing L.
A framework to understand Project Robustness
Third International Conference on Design Computing and Cognition - DCC08; Atlanta

Adolphy S., Gericke K., Blessing L.
Estimation in Engineering Design
Third International Conference on Design Computing and Cognition - DCC08; Atlanta

Gericke K., Schmidt-Kretschmer M., Blessing L.
Dealing with requirements: Influences on Idea Generation in the Early Stages of Product Development
Proceedings of the 7th Design Thinking Research Symposium DTRS7; London

Schmidt-Kretschmer M., Gericke K., Blessing L.
Managing requirements or being managed by requirements - results of an empirical study
Proceedings of the International Conference on Engineering Design ICED07; Paris

Gericke K., Blessing L.
Analyse prozessbezogener Einflussfaktoren zur Steigerung der Robustheit von Produktenwicklungsprojekten
Tagungsband 17. Symposium "Design for X"; Neukirchen

Gries B., Gericke K., Blessing L.
How companies learn from design flaws: results from an empirical study of the german manufacturing industry
Proceedings of the International Conference on Engineering Design ICED05; Melbourne

Meißner M., Gericke K., Gries B., Blessing L.
Eine adaptive Produktentwicklungsmethodik als Beitrag zur Prozessgestaltung in der Produktentwicklung
Tagungsband 16. Symposium "Design for X"; Neukirchen